Balancers for Water Meters
In addition to conventional horizontal balancing machines on a bed, we offer compact balancing machines, which correspond to ergonomic requirements of a customer.
In addition to conventional horizontal balancing machines on a bed, we offer compact balancing machines, which correspond to ergonomic requirements of a customer. The greatest advantage of compact balancing machines is the possibility of easy placement—embedded vibration insulators do not require foundations. As such, our compact machines occupy a small area in comparison to conventional balancing machines on a bed. This is made possible by a guard coupled with the balancing machine body—these guards do not occupy additional square meters of area. In spite of their small dimensions, these compact balancing machines have a robust body with silica sand filling to dampen vibration. As a result, our machines are capable of very accurate measurements and they are less sensitive to outside disturbances.
- Using an appropriate machine design and a suitable safety guarding machines can also be used for high-speed balancing
- Permanent calibration and rotor specific calibration.
- Pedestals with integrated pins and V-blocks
- Latest measuring and control unit ROTORTEST.
- Mass correction types: milling, drilling, grinding, punching, welding, adding balancing weights etc.
- Safety standards ISO 7475 / DIN 45690 compliant.
The following parameters are standard and can be modified upon request.
|Maximum weight for symmetrical rotor||15 kg||30 kg|
|Maximum rotor diameter||200 / 390 mm||700 mm|
|ISO 2953 Reduction Ratio||98%||98%|
|Accuracy - MU 60 runs @ 95% 2 standard deviations||0,1||0,15|
|Journal range||5-25 mm||10-140 mm|
|Working height approx.||1100 mm||1200 mm|
|Voltage & phase. All 50-60Hz||110 or 240v 1ph||220 or 400V 3 ph|
|Maximum distance between bearers with standard bed||360 mm||1200mm/1500mm|
|Minimum distance between bearers with/without belt drive||55 mm||50mm/30mm|
|Maximum diameter with over belt drive (under slung)||200 mm||385 mm|
|Motor speed at drive pulley infinitely variable||1500/3000 RPM||1500/3000 RPM|
|AC motor size||0,4kW||0,75 kW|