In addition to conventional horizontal balancing machines on a bed, we offer compact balancing machines, which correspond to ergonomic requirements of every customer.
In addition to conventional horizontal balancing machines on a bed, we offer compact balancing machines, which correspond to ergonomic requirements of every customer. The greatest advantage of compact balancing machines is the possibility of easy placement—embedded vibration insulators do not require foundations. As such, our compact machines occupy a small area in comparison to conventional balancing machines on a bed. This is made possible by a guard coupled with the balancing machine body—these guards do not occupy additional square meters of area. In spite of their small dimensions, these compact balancing machines have a robust body with silica sand filling to dampen vibration. As a result, our machines are capable of very accurate measurements and they are less sensitive to outside disturbances.
- Using an appropriate machine design and a suitable safety guarding machines can also be used for high-speed balancing
- Permanent calibration and rotor specific calibration
- Pedestals with integrated pins and V-blocks
- Highest measuring accuracy
- Latest measuring and control unit ROTORTEST
- Mass correction types: milling, drilling, grinding, punching, welding, adding balancing weights etc.
- Safety standards ISO 21940-23:2012 (old ISO 7475 and DIN 45690) compliant
The following parameters are standard and can be modified upon request.
|Maximum weight for symmetrical rotor||15 kg||30 kg||50 kg||80 kg||130 kg|
|Maximum rotor diameter||200 / 390 mm||700 mm||700 mm||700 mm||700 mm|
|ISO 2953 Reduction Ratio||98%||98%||98%||98%||98%|
|Accuracy – MU 60 runs @ 95% 2 standard deviations||0,1||0,15||0,15||0,2||0,2|
|Journal range||5-25 mm||10-140 mm||10-140 mm||10-140 mm||10-140 mm|
|Working height approx.||1100 mm||1200 mm||1200 mm||1200 mm||1200 mm|
|Voltage & phase. All 50-60Hz||110 or 240v 1ph||220 or 400V 3 ph||220 or 400V 3 ph||220 or 400V 3 ph||220 or 400V 3 ph|
|Maximum distance between bearers with standard bed||360 mm||1200mm/1500mm||1200mm/1500mm||1200mm/1500mm||1200mm/1500mm|
|Minimum distance between bearers with/without belt drive||55 mm||50mm/30mm||50mm/30mm||50mm/30mm||50mm/30mm|
|Maximum diameter with over belt drive (under slung)||200 mm||385 mm||385 mm||385 mm||385 mm|
|Motor speed at drive pulley infinitely variable||1500/3000 RPM||1500/3000 RPM||1500/3000 RPM||1500/3000 RPM||1500/3000 RPM|
|AC motor size||0,4kW||0,75 kW||0,75 kW||1,1 kW||1,1 kW|